 |
|
HP : 0 / 104
MP : 13 / 1641
EXP : 19%
|
|
江湖小虾
成员等级: 5
发表总数: 41
金币总数: 145
所属组别: 普通成员
注册日期: 2003/09/2
|
我有cisco2621xm路由器一台，配置时copy 存盘后，从新启动配置便丢掉了，启机时显示的内容如下，各位达人给我看看为什么好吗!
System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
Copyright © 2002 by cisco Systems, Inc.
Testing lower main memory - data equals address
Testing lower main memory - checkerboard
Testing lower main memory - inverse checkerboard
Clearing lower 4K memory for cache initialization
Clearing bss
Reading monitor variables from NVRAM
Enabling interrupts
Enabling instruction cache
Reading cookie
Initializing main memory
Sizing NVRAM
Initializing PCI subsystem
Exiting init
C2600 platform with 32768 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x59421c
Stack pointer : 0x02000000
monstack : 0x8000617C
monra : 0x00000000
edata : 0x8000C1A0
magic : 0xFEEDFACE
memsize : 0x02000000
uncomp_size : 0x00E76AD4
comp_size : 0x00590068
comp_checksum : 0xFBEE2CA0
uncomp_checksum : 0x8047FC2E
Self decompressing the image : #################################################
############################################### [OK]
Source elf_hdr->e_shnum = 0x00000009
Setting up to copy ELF section 0x00000001
to image_info section 0x00000000
sh_name = 0x0000001B
sh_type = 0x00000001
sh_flags = 0x00000007
sh_addr = 0x80008000
sh_offset = 0x00000060
sh_size = 0x00A23D40
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000020
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000002
to image_info section 0x00000001
sh_name = 0x00000021
sh_type = 0x00000001
sh_flags = 0x00000003
sh_addr = 0x80A2BD40
sh_offset = 0x00A23DA0
sh_size = 0x00389DD5
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000008
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000003
to image_info section 0x00000002
sh_name = 0x00000029
sh_type = 0x00000001
sh_flags = 0x00000002
sh_addr = 0x80DB5B15
sh_offset = 0x00DADB75
sh_size = 0x00000003
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000004
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000004
to image_info section 0x00000003
sh_name = 0x00000031
sh_type = 0x00000001
sh_flags = 0x00000003
sh_addr = 0x80DB5B18
sh_offset = 0x00DADB78
sh_size = 0x000C8DA4
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000008
sh_entsize = 0x00000000
cpu type : 0x0000002B
uncomp_size : 0x00E76AD4
monstack : 0x8000617C
image_info.entry_point = 0x80008000
image_info.section_count = 0x00000004
image_info.monstack = 0x8000617C
image_info.monra = 0x00000000
image_info.param0 = 0x00000002
image_info.param1 = 0x00000000
image_info.param2 = 0x00000000
image_info.param3 = 0x00000000
Section Index = 0x00000000
source = 0x8003478C
dest = 0x80008000
bytes = 0x00A23D40
Section Index = 0x00000001
source = 0x80A584CC
dest = 0x80A2BD40
bytes = 0x00389DD5
Section Index = 0x00000002
source = 0x80DE22A1
dest = 0x80DB5B15
bytes = 0x00000003
Section Index = 0x00000003
source = 0x80DE22A4
dest = 0x80DB5B18
bytes = 0x000C8DA4
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
00036D 0X00103980 C2621XM Dual Fast Ethernet
0X000F3BB0 public buffer pools
0X00211000 public particle pools
TOTAL: 0X00408530
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 5Mb.
Using 15 percent iomem. [5Mb/32Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
© of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
© (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS ™ C2600 Software (C2600-I-M), Version 12.2(8)T5, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright © 1986-2002 by cisco Systems, Inc.
Compiled Fri 21-Jun-02 08:50 by ccai
Image text-base: 0x80008074, data-base: 0x80A2BD40
cisco 2621XM (MPC860P) processor (revision 0x100) with 27648K/5120K bytes of mem
ory.
Processor board ID JAD06290AU9 (3054895074)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: |
