 |
|
HP : 0 / 1
MP : 0 / 0
EXP : 0%
|
|
新手上路
成员等级: 1
发表总数: 1
金币总数: 16
所属组别: 普通成员
注册日期: 2006/03/14
|
cisco2611xm中配置nm-16am拔号模块时在执行到以下几条命令时出现错误提示，不知道是什么意思，希望有人能帮忙解决一下：
cisco2611xm(config-line)#int group-async 1
cisco2611xm(config-if)#async mod
cisco2611xm(config-if)#async mode de
cisco2611xm(config-if)#async mode dedicated
cisco2611xm(config-if)#line 33 48
cisco2611xm(config-line)#exec
cisco2611xm(config-line)#autos
cisco2611xm(config-line)#autoselect ppp
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
%Autoselect w/o the interface command 'Async mode interactive' is useless
cisco2611xm(config-line)#autoselect during-login
cisco2611xm(config-line)#login
cisco2611xm(config-line)#login loca
cisco2611xm(config-line)#login local
cisco2611xm(config-line)#modem InOut
cisco2611xm(config-line)#tra
cisco2611xm(config-line)#transport input all
cisco2611xm(config-line)#stopbits 1
This command has no effect on this line; use modem AT commands instead
cisco2611xm(config-line)#speed 38400
This command has no effect on this line; use modem AT commands instead
cisco2611xm(config-line)#flowcontrol hardware
% This command has no effect on this line; use modem AT commands instead
cisco2611xm(config-line)#end
上面那两句错误提示是什么意思？
%Autoselect w/o the interface command 'Async mode interactive' is useless
这个地方我把前面async mode dedicated 换成async mode interactive之后就可以正常进行了。
可是我不知道这两句倒底有什么区别，好像一个是交互式的，一个只能用异步工作是吧。还有就是如果这
个地方配配置不上，影响拔号使用吗？小弟新手，大家别见笑啊！
% This command has no effect on this line; use modem AT commands instead
这句话是什么意思，我应该怎么做？
附：
cisco2611xm#sh ver
Cisco Internetwork Operating System Software
IOS ™ C2600 Software (C2600-IPBASE-M), Version 12.3(6f), RELEASE SOFTWARE (fc1)
Copyright © 1986-2005 by cisco Systems, Inc.
Compiled Tue 16-Aug-05 17:54 by ssearch
Image text-base: 0x80008098, data-base: 0x80ED16A0
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
cisco2611xm uptime is 4 hours, 39 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ipbase-mz.123-6f.bin"
cisco 2611XM (MPC860P) processor (revision 0x401) with 126976K/4096K bytes of memory.
Processor board ID FHK0926F2C4 (2416180150)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
16 terminal line(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
|
