NetBuddy.Org论坛 - 6509上的Hybrid转为Native IOS出现的问题！麦子等高手进！


	欢迎访客 ( 登陆 \| 注册 )

NetBuddy.Org论坛 ->技术论坛 ->网络世界

前往页面: (2) [1] 2 ( 前往第一篇未阅读文章 )

6509上的Hybrid转为Native IOS出现的问题！麦子等高手进！

« 上一篇主题 | 下一篇主题 »

跟踪主题 | 邮寄主题 | 打印主题

post

1. 6509上的Hybrid转为Native IOS出现的问题！麦子等高手进！

HP : 0 / 376

MP : 98 / 4480

EXP : 6%

名动江湖

成员等级: 16
发表总数: 295
金币总数: 674
所属组别: 中级成员
注册日期: 2004/12/13

在做Hybrid转Native时，操作如下：

1、利用TFTP将Native ios拷到引擎的Bootflash:中去。

2、在交换引擎上reset，并在重新启动后按下Ctrl+Break键进入Rommon模式下。输入如下命令

CONFIG_FILE=
sync
boot bootflash:c6sup22-ps-mz.121-23.E4.bin

此时，系统自动加载Native IOS进入了操作提示符下，按说一切都是可以的了，只是还没有格式化sup-bootflash成Native IOS算法下的格式了。可是，过了约十五秒，就提示如下错误，接着自动进入Rommon模式下：

c6k_sup2 processor with 131072 Kbytes of main memory

Autoboot executing command: "boot bootflash:"

monitor: command "boot" aborted due to user interrupt
Exit at the end of BOOT string
rommon 1 > dir
usage: dir <device>
rommon 2 > dir bootflash:
File size Checksum File name
7714276 bytes (0x75b5e4) 0x8f57173d cat6000-sup2k8.7-6-17.bin
19053424 bytes (0x122bb70) 0x6e515aa0 c6sup22-ps-mz.121-23.E4.bin
rommon 3 > set
PS1=rommon ! >
boot=bootflash:c6sup22-ps-mz.121-23.E4.bin
BSI=0
CRASHINFO=bootflash:crashinfo_20060724-045604
RET_2_RTS=04:56:06 UTC Mon Jul 24 2006
RET_2_RCALTS=1153716968
BOOT=bootflash:,1;
CONFIG_FILE=bootflash:switch.cfg
SW_CONSIS=0
?=0
rommon 4 > CONFIG_FILE=
rommon 5 > sync
rommon 6 > boot bootflash:c6sup22-ps-mz.121-23.E4.bin

Self decompressing the image :

################################################################################

################################################################################

############################# [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
© of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
© (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco Internetwork Operating System Software
IOS ™ c6sup2_sp Software (c6sup2_sp-SP-M), Version 12.1(23)E4, RELEASE

SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright © 1986-2005 by cisco Systems, Inc.
Compiled Fri 19-Aug-05 12:46 by tinhuang
Image text-base: 0x40020F90, data-base: 0x409AC000

00:00:02: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor
00:00:03: %OIR-6-CONSOLE: Changing console ownership to route processor

System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright © 2002 by cisco Systems, Inc.
Cat6k-MSFC2 platform with 262144 Kbytes of main memory

Download Start
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!
Download Completed! Booting the image.
Self decompressing the image :

################################################################################

################################################################################

#################################### [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
© of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
© (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco Internetwork Operating System Software
IOS ™ c6sup2_rp Software (c6sup2_rp-PS-M), Version 12.1(23)E4, RELEASE

SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright © 1986-2005 by cisco Systems, Inc.
Compiled Fri 19-Aug-05 12:08 by tinhuang
Image text-base: 0x40008F90, data-base: 0x4188E000

cisco WS-C6509 (R7000) processor (revision 3.0) with 227328K/34816K bytes of

memory.
Processor board ID TBM06135712
R7000 CPU at 300Mhz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
1 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
381K bytes of non-volatile configuration memory.

16384K bytes of Flash internal SIMM (Sector size 512K).
%Error opening tftp://255.255.255.255/network-confg (Socket error)
%Error opening tftp://255.255.255.255/cisconet.cfg (Socket error)
SETUP: new interface Vlan1 placed in "shutdown" state
SETUP: new interface GigabitEthernet1/1 placed in "shutdown" state
--------------------------//此处省略其它接口状态
SETUP: new interface FastEthernet7/48 placed in "shutdown" state

Press RETURN to get started!

00:00:34: %C6K_PLATFORM-5-MISMATCH: 'bootflash' device programming algorithm

mismatch detected on Router (module: 1), formatting is recommended.
00:00:34: %C6K_PLATFORM-5-LESS_SPACE: May not have enough space to save the

crash info. on flash of Router on module: 1
00:00:34: RP: Currently running ROMMON from S (Gold) region
00:01:03: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS ™ c6sup2_rp Software (c6sup2_rp-PS-M), Version 12.1(23)E4, RELEASE

SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright © 1986-2005 by cisco Systems, Inc.
Compiled Fri 19-Aug-05 12:08 by tinhuang
00:00:38: %C6K_PLATFORM-SP-5-MISMATCH: 'sup-bootflash' device programming

algorithm mismatch detected on SP (module: 1), formatting is recommended.
00:00:38: SP: SP: Currently running ROMMON from S (Gold) region
00:01:03: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold

start
00:01:02: %SYS-SP-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS ™ c6sup2_sp Software (c6sup2_sp-SP-M), Version 12.1(23)E4, RELEASE

SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright © 1986-2005 by cisco Systems, Inc.
Compiled Fri 19-Aug-05 12:46 by tinhuang
00:01:04: %C6KENV-SP-4-FANVERCHK: Power-supply 1 inserted is only compatible

with Version 1 fan-tray. Please make sure fan is low-output fan-tray
00:01:04: %OIR-SP-6-INSPS: Power supply inserted in slot 1
00:01:04: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
00:01:04: %C6KENV-SP-4-FANVERCHK: Power-supply 2 inserted is only compatible

with Version 1 fan-tray. Please make sure fan is low-output fan-tray
00:01:04: %OIR-SP-6-INSPS: Power supply inserted in slot 2
Router>

Router>en
Router#show run
Building configuration...

Current configuration : 3152 bytes
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
service counters max age 10
!
hostname Router
!
!
ip subnet-zero
!
!
!
mls flow ip destination
mls flow ipx destination
spanning-tree mode pvst
!
redundancy
mode rpr-plus
main-cpu
auto-sync running-config
auto-sync standard
!
!
!
interface GigabitEthernet1/1
no ip address
shutdown
!
interface GigabitEthernet1/2
no ip address
shutdown
!
interface FastEthernet7/1
no ip address
shutdown
!
interface FastEthernet7/2
no ip address
shutdown
!
------//此处省略这些模块接口信息，都未进行任何配置
!
interface FastEthernet7/48
no ip address
shutdown
!
interface Vlan1
no ip address
shutdown
!
ip classless
no ip http server
!
!
!
line con 0
line vty 0 4
!
!
end

Router#
00:01:43: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimum Online Diagnostics..

%Software-forced reload

Breakpoint exception, CPU signal 23, PC = 0x40297D84

-Traceback= 40297D84 40295ED8 403689BC 403689EC 403FDC80 40358B64 40358BC0

4032B250 4032C0F0 402DFF64 402DD718 402DD98C 4029BF5C
$0 : 00000000, AT : 41920000, v0 : 41D30000, v1 : 00000001
a0 : 41D28A70, a1 : 0000F100, a2 : 00000000, a3 : 418B0000
t0 : 4029C520, t1 : 3401F101, t2 : 4029C530, t3 : FFFF00FF
t4 : 4029C520, t5 : 0000001C, t6 : 6F6E202C, t7 : 00000008
s0 : 00000000, s1 : 00000000, s2 : 426E2F78, s3 : 426E2F78
s4 : 0E374BFA, s5 : 00000040, s6 : 00009000, s7 : 0000005E
t8 : 00000000, t9 : 00000000, k0 : 00000000, k1 : 00000000
gp : 41922800, sp : 420B7040, s8 : 00000000, ra : 40295ED8
EPC : 40297D84, ErrorEPC : 40266B50, SREG : 3401F103
MDLO : 00000000, MDHI : 00000000, BadVaddr : E7F7FFBC
CacheErr : 80400000, DErrAddr0 : 01D28A70, DErrAddr1 : 020B6ED8
Cause 00000024 (Code 0x9): Breakpoint exception

Writing crashinfo to bootflash:crashinfo_20060725-022835

=== Flushing messages (02:28:35 UTC Tue Jul 25 2006) ===

Buffered messages:

00:00:34: %C6K_PLATFORM-5-MISMATCH: 'bootflash' device programming algorithm

mismatch detected on Router (module: 1), formatting is recommended.
00:00:34: %C6K_PLATFORM-5-LESS_SPACE: May not have enough space to save the

crash info. on flash of Router on module: 1
00:00:34: RP: Currently running ROMMON from S (Gold) region
00:01:03: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS ™ c6sup2_rp Software (c6sup2_rp-PS-M), Version 12.1(23)E4, RELEASE

SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright © 1986-2005 by cisco Systems, Inc.
Compiled Fri 19-Aug-05 12:08 by tinhuang
00:00:38: %C6K_PLATFORM-SP-5-MISMATCH: 'sup-bootflash' device programming

algorithm mismatch detected on SP (module: 1), formatting is recommended.
00:00:38: SP: SP: Currently running ROMMON from S (Gold) region
00:01:03: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold

start
00:01:02: %SYS-SP-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS ™ c6sup2_sp Software (c6sup2_sp-SP-M), Version 12.1(23)E4, RELEASE

SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright © 1986-2005 by cisco Systems, Inc.
Compiled Fri 19-Aug-05 12:46 by tinhuang
00:01:04: %C6KENV-SP-4-FANVERCHK: Power-supply 1 inserted is only compatible

with Version 1 fan-tray. Please make sure fan is low-output fan-tray
00:01:04: %OIR-SP-6-INSPS: Power supply inserted in slot 1
00:01:04: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
00:01:04: %C6KENV-SP-4-FANVERCHK: Power-supply 2 inserted is only compatible

with Version 1 fan-tray. Please make sure fan is low-output fan-tray
00:01:04: %OIR-SP-6-INSPS: Power supply inserted in slot 2
00:01:43: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimum Online

Diagnostics...
Queued messages:
00:01:50: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging

output.

00:01:48: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has failed due to

exception , resetting [1/1]
00:01:50: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure

console debugging output.

00:01:51: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor

*** System received a Software forced crash ***
signal= 0x17, code= 0x42230000, context= 0x4225a654
PC = 0x4012e90c, Cause = 0x1820, Status Reg = 0x34018002
rommon 7 >

rommon 7 > dir bootflash:
File size Checksum File name
7714276 bytes (0x75b5e4) 0x8f57173d cat6000-sup2k8.7-6-17.bin
19053424 bytes (0x122bb70) 0x6e515aa0 c6sup22-ps-mz.121-23.E4.bin
279999 bytes (0x445bf) 0x9364a83b crashinfo_20060725-022835 //自动生成了crashinfo文件
rommon 8 >

发表于2006/07/25, 12:41

yingwenzimu

2. Re:6509上的Hybrid转为Native IOS出现的问题！麦子等高手进！...

HP : 0 / 367

MP : 93 / 4302

EXP : 68%

名动江湖

成员等级: 15
发表总数: 281
金币总数: 560
所属组别: 中级成员
注册日期: 2005/01/5

00:00:34: %C6K_PLATFORM-5-MISMATCH: 'bootflash' device programming algorithm

mismatch detected on Router (module: 1), formatting is recommended.

为什么不重新格式化一下呢，既然都换成了native

还有这个ios没有问题吧?

Tomorrow Is Another Day

发表于2006/07/25, 13:49

麦子

3. Re:6509上的Hybrid转为Native IOS出现的问题！麦子等高手进！...

HP : 250 / 1254

MP : 1625 / 21993

EXP : 16%

迟则生变

成员等级: 51
发表总数: 4877
金币总数: 308
所属组别: 管理员
注册日期: 2003/01/9

是不是有两个引擎？有没有把另外一个先拔下来？

没有谁能像一座孤岛/在大海里独踞/每个人都像一块小小的泥土/连接成整个陆地/如果一块泥土被海水冲去/欧洲将缺其一隅/这如同一座山岬/也如同你的朋友和你自己/无论谁死了/都是自己的一部分在死去/因为我包含在人类这个概念里/因此我从不问丧钟为谁而鸣/它为我，也为你
No man is an Island, entire of itself; every man is a piece of the Continent, a part of the main; if a clod be washed away by the sea, Europe is the less, as well as if a promontory were, as well as if a man or of thy friends or of thine own were; any man's death diminishes me, because I am involved in Mankind; And therefore never send to know for whom the bell tolls; It tolls for thee.

发表于2006/07/25, 14:08

post

4. RE: 6509上的Hybrid转为Native IOS出现的问题！麦子等高手进！...

HP : 0 / 376

MP : 98 / 4480

EXP : 6%

名动江湖

成员等级: 16
发表总数: 295
金币总数: 674
所属组别: 中级成员
注册日期: 2004/12/13

QUOTE

IOS是从Cisco网站上下载下来的，应该没有问题。这个格式化只是推荐，我想并不会导致这个问题的出现！而且，在显示提示符后不到十五秒就自动进入了Rommon模式下，我想这么短的时间也无法完成格式化，更不用说格式化后再从TFTP拷入Native IOS了，所以没做Format

发表于2006/07/25, 14:22

post

5. RE: 6509上的Hybrid转为Native IOS出现的问题！麦子等高手进！...

HP : 0 / 376

MP : 98 / 4480

EXP : 6%

名动江湖

成员等级: 16
发表总数: 295
金币总数: 674
所属组别: 中级成员
注册日期: 2004/12/13

QUOTE

是不是有两个引擎？有没有把另外一个先拔下来？

是有两个引擎的，但是另一块引擎已拨下来了。显示情况如下：

cisco6509> (enable) show module
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor WS-X6K-S2U-MSFC2 yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok
7 7 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok

Mod Module-Name Serial-Num
--- ------------------- -----------
1 SAD054906WV
15 SAD054908D1
7 SAL0546EBL8

Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ---------- ----
1 00-01-64-15-a1-44 to 00-01-64-15-a1-45 3.2 6.1(4) 6.2(3)
00-01-64-15-a1-42 to 00-01-64-15-a1-43
00-08-20-2f-26-00 to 00-08-20-2f-29-ff
15 00-08-7c-d0-18-80 to 00-08-7c-d0-18-bf 1.3 12.1(7)E 12.1(7)E
7 00-05-74-64-ca-80 to 00-05-74-64-ca-af 5.0 5.4(2) 6.2(3)

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw
--- ----------------------- ------------------- ----------- ------
1 L3 Switching Engine II WS-F6K-PFC2 SAD0549041R 3.0

这一句能不能看出点什么来？
00:01:04: %C6KENV-SP-4-FANVERCHK: Power-supply 2 inserted is only compatible with Version 1 fan-tray. Please make sure fan is low-output fan-tray

发表于2006/07/25, 14:26

麦子

6. Re:6509上的Hybrid转为Native IOS出现的问题！麦子等高手进！...

HP : 250 / 1254

MP : 1625 / 21993

EXP : 16%

迟则生变

成员等级: 51
发表总数: 4877
金币总数: 308
所属组别: 管理员
注册日期: 2003/01/9

用cat6000-sup2k8.7-6-17.bin启动把crashinfo倒出来看看？

CCO上介绍的方法是用slot0:里面的image把系统启动然后sup-bootflash：应该经过格式化的，你等于是直接把文件拷贝到了sup-bootflash中，不知道这样会不会有影响。

发表于2006/07/25, 14:39

post

7. Re: Re:6509上的Hybrid转为Native IOS出现的问题！麦子等高手进！......

HP : 0 / 376

MP : 98 / 4480

EXP : 6%

名动江湖

成员等级: 16
发表总数: 295
金币总数: 674
所属组别: 中级成员
注册日期: 2004/12/13

嗯，CCO上介绍的转换方法我看了，我没那么做，觉得这样做也是可以的。等下，我去倒那个Crashinfo文件。

下面是两个Crashinfo文件：

crashinfo_20060725-022834：是从三层的Bootflash中导出来的。
crashinfo_20060725-022835：是从两层的Bootflash中导出来的。

请查阅！

	下载附件
	crashinfo_20060725_022834 ( 下载次数: 22 )

	下载附件
	crashinfo_20060725_022835 ( 下载次数: 13 )

发表于2006/07/25, 14:42

yingwenzimu

8. Re:6509上的Hybrid转为Native IOS出现的问题！麦子等高手进！...

HP : 0 / 367

MP : 93 / 4302

EXP : 68%

名动江湖

成员等级: 15
发表总数: 281
金币总数: 560
所属组别: 中级成员
注册日期: 2005/01/5

00:01:04: %C6KENV-SP-4-FANVERCHK: Power-supply 2 inserted is only compatible with Version 1 fan-tray. Please make sure fan is low-output fan-tray

这个是提示插入的电源2仅与类型1的风扇兼容。以前一直使用正常的话，应该不是这个的问题

BTW：看crashinfo看的好晕!

期待正解！

Tomorrow Is Another Day

发表于2006/07/25, 15:36

麦子

9. Re:6509上的Hybrid转为Native IOS出现的问题！麦子等高手进！...

HP : 250 / 1254

MP : 1625 / 21993

EXP : 16%

迟则生变

成员等级: 51
发表总数: 4877
金币总数: 308
所属组别: 管理员
注册日期: 2003/01/9

00:01:43: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimum Online Diagnostics...
00:01:48: %DIAG-SP-3-MINOR: Module 1: Online Diagnostics detected a Minor Error. Please use 'show diagnostic Module 1' to see test results.
00:01:48: %DIAG-SP-3-SUP_FAILURE: Active supervisor has online diagnostic failure 0x6: EARL FAILURE
00:01:48: %PFREDUN-SP-4-AUTOBOOT: Disable autoboot for Supervisor in slot 1
00:01:48: %PFREDUN-SP-6-ACTIVE: Sup in slot 1 is crashing due to Supervisor online diag failure

这一段比较关键，引擎自检错误？重新安装一下引擎看看？

发表于2006/07/25, 15:57