 |
|
 |
 |
cisco 2950无法正常启动,只要重启就到swith:模式下 |
|
|
|
 |
|
|
| 1. cisco 2950无法正常启动,只要重启就到swith:模式下 |
  |
|
 |
|
HP : 0 / 150
MP : 22 / 1775
EXP : 2%
|
|
江湖游侠
成员等级: 7
发表总数: 66
金币总数: 136
所属组别: 普通成员
注册日期: 2004/12/27
|
请高手指教下面的问题,谢谢!
最近在给cisco2950进行升级ios时出现了故障,它无法正常启动,只要重启就到swith:模式下.也按照网上一些资料在switch:模式下,重新安装过ios,并且可以使用boot ****.bin到正常模式下,也修改了boot system ***.bin,还进行了copy run start保存,可只要重启就到了switch:模式下. |
|
|
|
| 2. Re:cisco 2950无法正常启动,只要重启就到swith:模式下 |
|
|
 |
|
HP : 0 / 118
MP : 16 / 1859
EXP : 75%
|
|
江湖小虾
成员等级: 5
发表总数: 48
金币总数: 97
所属组别: 普通成员
注册日期: 2003/09/2
|
我的2950也这样子了.一启动.出现如下信息,是怎么回事啊???
Loading "flash:/c2950-i6q4l2-mz.121-13.EA1.bin"...##############################
################################################################################
################################################################################
################################################################################
###################################################
File "flash:/c2950-i6q4l2-mz.121-13.EA1.bin" uncompressed and installed, entry p
oint: 0x80010000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
© of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
© (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS ™ C2950 Software (C2950-I6Q4L2-M), Version 12.1(13)EA1, RELEASE SOFTWARE
(fc1)
Copyright © 1986-2003 by cisco Systems, Inc.
Compiled Tue 04-Mar-03 02:14 by yenanh
Image text-base: 0x80010000, data-base: 0x805A8000
Initializing flashfs...
flashfs[1]: 20 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 4875264
flashfs[1]: Bytes available: 2866176
flashfs[1]: flashfs fsck took 7 seconds.
flashfs[1]: Initialization complete.
Done initializing flashfs.
POST: System Board Test : Passed
POST: Ethernet Controller Test : Passed
ASIC Initialization Passed
%Error: initializing transceiver ports
%Error: initializing transceiver ports
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 2
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x03)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 3
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x04)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 4
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x05)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 5
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x06)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 6
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x07)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 7
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x08)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 8
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x09)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 9
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x0A)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id A
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x0B)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id B
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x0C)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id C
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x0D)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id D
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x0E)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id E
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x0F)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id F
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x10)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 10
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x11)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 11
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x12)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 12
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x13)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 13
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x14)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 14
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x15)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 15
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x16)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 16
%Error: initializing transceiver ports
strata_cmic_read_miim ERROR:
timeout (addr=0x02 id=0x17)
%PLATFORM_CAT2950-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 2 for phy id 17
%Error: initializing transceiver ports
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
|
|
|
|
| 3. Re:cisco 2950无法正常启动,只要重启就到swith:模式下 |
|
|
|
|
|
HP : 0 / 2
MP : 1 / 17
EXP : 10%
|
|
新手上路
成员等级: 1
发表总数: 3
金币总数: 13
所属组别: 普通成员
注册日期: 2006/10/26
|
检查交换机的注册值。
进入boot模式，删除FLASH内容，重新灌新的IOS试试看。
本公司经营CISCO,华为3COM 全系列网络产品的回收和销售,如有需求欢迎来电洽谈；
欢迎朋友联系讨论CISCO技术问题。
陆先生: 13911792560 QQ:31300645 MSN:tonylu10@msn.com |
|
|
|
| 4. Re:cisco 2950无法正常启动,只要重启就到swith:模式下 |
|
|
|
|
|
HP : 0 / 2
MP : 1 / 17
EXP : 10%
|
|
新手上路
成员等级: 1
发表总数: 3
金币总数: 13
所属组别: 普通成员
注册日期: 2006/10/26
|
2F的好像是硬件问题哦，有可能是时钟电路问题，或者内存，接口芯片问题。
本公司经营CISCO,华为3COM 全系列网络产品的回收和销售,如有需求欢迎来电洽谈；
欢迎朋友联系讨论CISCO技术问题。
陆先生: 13911792560 QQ:31300645 MSN:tonylu10@msn.com |
|
|
|
| 0 名会员正在浏览该主题 (0 名游客 和 0 名隐身会员) |
| 0 名会员: |
|
|
